Our facility

Munktorp near Köping – a sawmill built for sawn timber in 3-metre lengths.

Ljungträ's sawmill in Munktorp from the air

Ljungträ is in Munktorp, just east of Köping in central Sweden. We saw locally sourced spruce and pine into finished sawn timber in 3.0 m, around 40,000 m³ a year. The saw line is built for short lengths, and that is what we do well.

From log to package

A sawmill is essentially a flow: the log goes in at one end and a finished package leaves the other. This is how it works at our mill, step by step.

1. Log intake and log sorting

The timber lorries unload in the log yard, where every load is measured in. The logs are then sorted into 13 diameter classes by top diameter, so that logs of the same size are sawn together. This is the first step towards uniform sawn timber: the more precise the sorting, the better each log fits the size it will become.

The logs are spruce and pine in 3.1 m, with a top diameter of 12–21 cm for spruce and 13–21 cm for pine. The log length is not the same as the finished length – the log carries an allowance so that the timber can be trimmed cleanly later on.

Timber lorry unloading under the measuring station at Ljungträ in Munktorp
Log piles in the log yard at Ljungträ

2. The saw line

The saw line comes from Söderhamn Eriksson and is built for short logs. The log is sawn into a cant and on into pieces of the right thickness and width, in one flow. We saw the same sizes in both spruce and pine, and the share of pine is growing.

Ljungträ's site from the air, with the saw house in the middle

3. Kiln drying

Freshly sawn timber holds a lot of water and has to be dried before it can be used. We dry in four kilns holding 165–170 m³ each, to the moisture content you need: KD 18%, 16%, 14% or 12%. The right moisture content means the timber is stable and ready to use on arrival.

4. Trimming and grading

In the trimming line the timber is cut to its finished length, 3.0 m, and graded automatically by a camera scanner (RemaSawco Boardscanner Q) that reads all four faces of every piece, around 50 pieces per minute. Every piece is placed in the right grade: O/S–V, VI, VII or sawfalling. Pieces that do not meet the standard are taken out here, so that what goes into the package is uniform in both grade and size.

Trim lengths are 2.7 m and 2.4 m. Agreed lengths, such as 3.05 m or 2.95–2.99 m for containers, are cut by arrangement.

Boards on their way into the scanner for automatic grading at Ljungträ
The grading line in the trimmer at Ljungträ

5. Packaging and loading

Graded and dried timber is packaged, marked and wrapped in plastic, so that the package withstands transport and storage. Packages are loaded onto lorries from the finished-goods store Monday to Friday. Hours and practical details are on the page Collection & loading.

Forklift with finished packages on the way to loading at Ljungträ

The facility in numbers

The key figures at a glance.

WhatLjungträ
Sawmill since1977
Saw lineSöderhamn Eriksson, built for short lengths
Log sorting13 diameter classes
LogsSpruce and pine in 3.1 m, top diameter 12–21 cm spruce and 13–21 cm pine
Kiln dryingFour kilns, 165–170 m³ per kiln
Moisture contentKD 18%, 16%, 14% and 12%
GradingCamera scanner, around 50 pieces per minute
GradesO/S–V, VI, VII and sawfalling (SF)
Finished length3.0 m, trim lengths 2.7 m and 2.4 m
Annual volumeAround 40,000 m³ of sawn timber
Employees17
CertificationPEFC and FSC® Chain of Custody

The raw material

The logs come from forests in the Mälardalen region and neighbouring counties. We buy spruce and pine in 3.1 m through purchasing organisations and timber traders.

Details of what we buy are on the Swedish page Råvara. Questions in English: sales at ljungtra dot com.

Certification

Ljungträ is PEFC and FSC® Chain of Custody certified. The certificates are shared with Boda Sawmill, and the whole range can be supplied as certified timber. The certificates are on the page Certificates.

Want to know more or visit us?

Email sales at ljungtra dot com and we will tell you more about the facility or arrange a visit.

Same ownership group as Boda Sawmill

Ljungträ AB and Boda Såg i Dalarna AB belong to the same ownership group. We share certification, working methods and several colleagues, and together we can offer sawn timber in both 3-metre and 4-metre lengths. Read more at bodasag.se.

Boda Såg i Dalarna AB